Electro-Voice CPS 4.10 Power Amplifier – 4 Channel – 4 x 1000W

Description

The Electro-Voice CPS4.10 amplifier offers four independent Class-D Variable Load Drive (VLD) amplifier blocks, each one capable of delivering up to 1000 Watts into Low-Z or High-Z loads. Per default, each channel can be configured individually for max. power output into either 2 Ω, 4 Ω, 70V- or 100V networks without involvement of any output transformers. Being designed for professional audio installation market, special care was taken for long term cost of ownership parameters: In addition to remarkably low current consumption and heat dissipation, the CPS4.10 provides remote standby switching with just 5 Watts consumption in standby mode. An optional remote control module RCM-810 provides control and supervision features via IRIS-Net, including monitoring of amplifier status and real time load supervision. In addition, via RCM-810 the Variable Load Drive characteristics can be set for max. power output into any load between 2 Ω and 10 Ω, in steps of 0.1 Ω.

Features:

• Four channels in one compact rack-efficient unit
• 1000 W per channel
• 70/100 V operation for distributed systems
• Class-D design for optimum efficiency
• Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring
• IRIS-Net selection of each channel’s impedance (2-10 Ω in 0.1 Ω steps)
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter (Hi-Z mode)
• Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• Front-to-rear fans

Specifications:

• Amplifier Gain: 32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
• Analog Inputs: 4, electronically balanced, Phoenix-type
• Audio Network: No
• CAN Bus Interface: Optional (RCM-810 card)
• Continuous Rated Power (1 kHz, THD 1%) 100v: 1000 Watts
• Continuous Rated Power (1 kHz, THD 1%) 2Ω: 1000 Watts
• Continuous Rated Power (1 kHz, THD 1%) 4Ω: 1000 Watts
• Continuous Rated Power (1 kHz, THD 1%) 70v: 1000 Watts
• Continuous Rated Power (1 kHz, THD 1%) 8Ω: 500 Watts
• Continuous Rated Power (20-20 kHz, THD<0,2%) 100v: 900 Watts
• Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 900 Watts
• Continuous Rated Power (20-20 kHz, THD<0,2%) 70v: 900 Watts
• Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 450 Watts
• Cooling: Front-to-Rear, continuously variable fans
• DIM 30: 0.02 %
• Electronics Type: Amplifier
• Frequency Response: 15 Hz-30 kHz
• Impedance: 2/4/8/8 VLD/70 V/100V Ω
• Input Impedance (Balanced): 20 kΩ
• Input Sensitivity: 0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55) 70V/100V
• Intermodulation Distortion (SMPTE): 0.05 %
• Mains Voltage: 220 – 240 V, 50 – 60 Hz or 120 V, 50 – 60 Hz, 50 – 60 Hz
• Maximum Bridged Output 4Ω: 2000 Watts
• Maximum Bridged Output 8Ω: 2000 Watts
• Maximum Input Voltage: 22 9.76 Vrms
• Network Control (IRIS-Net): Optional (RCM-810 card)
• Signal-to-Noise Ratio (A-weighted): 103 dB
• Slew Rate: 28 V/µs
• Topology: Class-D
• Total Harmonic Distortion: 0.05 %
• Variable Load Drive (VLD): Yes
• Height: 2RU 88.1 mm (3.47″)
• Width: 482.6 mm (19″)
• Depth: 421.5 mm (16.59″)
• Weight Net: 11.1 kg (24.47 lbs)

Data_Sheet_94287_File_1.pdf
User_Manual_94270_File_2.pdf